Speak with us today: 1800 629 824
Laundry Equipment
Our promise is in our name























MLE/G22PN Maytag Commercial 9kg stack Washer/Dryer – Electric
The MLE/G22PN electric stack washer/dryer is designed to give your laundry facilities the performance of a 9kg washer and 9kg dryer – all within the floor space of one washer alone!
Maytag Commercial dura-core drive system was designed and tested to run 15,000 cycles, with high extraction speeds up to 1,000 RPMs during the washers spin to reduce the time needed in the dryer on site.
M-Series technology allows easy use for laundry attendants, with super simple cycle selection.
- Available as MLE22PN Electric model or MLG22PN Gas Model (Natural gas or LPG)
- large 9kg washer & 9kg dryer capacity for bulky items
- Washing machine featuring DuraCore Drive System featuring a triple lip seal, robust shaft sleeve and premium bearings built to last and tested to over 15,000 cycles
- Energy Efficient cleaning using on average only 40liters of water per cycle
- TurboVent technology in the dryer for super fast drying time and ease of installation on site
- Easy to use cycle selection
- Super quick cycle times
- backed by the longest and best warranty in the industry – first 12 months parts and labour, 5 years for all parts and washer main drive parts for 7 years*



Built tough
triple-lip seal, robust shaft sleeve, premium bearings, die-cast trunnion, 9kg capacity, advanced spin technology



Cost effective
40L average water use per cycle, short cycles for higher turnover, stack with a dryer to save on space



Customer friendly
super quick cycle time, easy controls, clear digital display screen



Leading warranty
1 year on labour, 5 years on all parts, 7 years on drive parts
Below is a brief summary of site requirments for install. Check install manual for all requirments.
- Hot and Cold hoses provided to connect to ¾” hot and cold water taps within 1m of unit
- Drain hose provided to go into standpipe or laundry drain within 1m of unit
- MLE22PN Electric unit comes without powercord to be hardwired into a dedicated 25AMP circuit by licensed electrican.
- MLG22PN GAS unit comes pre-fitted with 10amp power cord to plug into standard power point on site – 1 power cord per stack unit.
- MLG22PN GAS unit is available as either Natural Gas or LPG – Gas unit requries connection to gas and fluing on site by licnesed gas plumber as per local gas code.
- requires fluing to external air on ste. Plastic fluing can not be used, we recommend rigid galv ducting
- Unit needs to be leveled on site



Built tough
triple-lip seal, robust shaft sleeve, premium bearings, die-cast trunnion, 9kg capacity, advanced spin technology



Cost effective
40L average water use per cycle, short cycles for higher turnover, stack with a dryer to save on space



Customer friendly
super quick cycle time, easy controls, clear digital display screen



Leading warranty
1 year on labour, 5 years on all parts, 7 years on drive parts
Below is a brief summary of site requirments for install. Check install manual for all requirments.
- Hot and Cold hoses provided to connect to ¾” hot and cold water taps within 1m of unit
- Drain hose provided to go into standpipe or laundry drain within 1m of unit
- MLE22PN Electric unit comes without powercord to be hardwired into a dedicated 25AMP circuit by licensed electrican.
- MLG22PN GAS unit comes pre-fitted with 10amp power cord to plug into standard power point on site – 1 power cord per stack unit.
- MLG22PN GAS unit is available as either Natural Gas or LPG – Gas unit requries connection to gas and fluing on site by licnesed gas plumber as per local gas code.
- requires fluing to external air on ste. Plastic fluing can not be used, we recommend rigid galv ducting
- Unit needs to be leveled on site
Request a Quote
We service and repair any commercial or industrial brand of washing machine or dryer anywhere
in Australia. Complete the form below and our service team will get back to you ASAP.